Main Page

From Tabletop MRI
Revision as of 22:52, 22 May 2017 by Jaystock (Talk | contribs) (Lab Manuals + Course Notes)

Jump to: navigation, search

This Wiki is a resource for people who are assembling, programming, or using the instructional tabletop MRI scanner developed by a multi-institutional collaboration led by Larry Wald's group at the Martinos Center for Biomedical Imaging, Massachusetts General Hospital.

The scanner design is a low-cost resource for demonstrating concepts like magnetic resonance, spatial encoding, and the Fourier transform in an educational setting. The system was first used in MIT's undergraduate course 6.S02 - Intro to EECS II from a Medical Technology Perspective. Most of the components are open source designs.

The project was made possible through a collaboration between MGH, the Chinese Academy of Sciences (who built the magnets), Pascal Stang of Stanford University (who provided the MEDUSA console), and Maxim Zaitsev's group at the University of Freiburg (who designed the gradient coil traces). During fabrication we also benefited from access to the equipment and resources of the Center for Bits and Atoms at the MIT Media Lab.

The scanner design is described in an abstract from ISMRM 2014.

First delivery to MIT: photo here Systems ready to roll out: photo here Students and faculty using the scanners in MIT 6.S02: photos here

Slides describing the tabletop scanner from the ISMRM 2014 Conference.

System cart.jpg

Introduction

Other low-cost tabletop imaging systems:

Desktop MRI system with 2 cm bore from Steve Wright's lab at Texas A&M.

Open Source Mobile MR Relaxometer from Mark Griswold's lab at Case Western.

Terranova-MRI earth's field system from Magritek.

MRIjx table top teaching system from Niumag in Shanghai.

Pure Devices 0.5T tabletop system from Würzburg, Germany.

Hardware

Sequences

Images

Lab Manuals + Course Notes

2015 Class


2013 Class

Contributors

This "crowd-sourced" MRI scanner has benefited from the skills and efforts of many people. We wish to acknowledge some of the key contributors below:

Overall project leadership: Lawrence Wald (MGH)

Instructional lab documents: Lawrence Wald and Clarissa Cooley (MGH)

Advisors on technical and educational content: Elfar Adalsteinsson and Jacob White (MIT)

RF subsystem lead: Clarissa Cooley (MGH)

Gradient power amplifier design: V1: Thomas Witzel (MGH); V2: Nick Arango, Jacob White, Jason Stockmann, and Charlotte Sappo (MGH and MIT)

GUI software and sequences curator: Jason Stockmann (MGH)

Gradient wire pattern design: Feng Jia and Maxim Zaitsev (Freiburg)

Gradient coil fabrication and system mechanical integration: Cris LaPierre (MGH)

MEDUSA Console: Pascal Stang and Greig Scott (Stanford & Procyon Research)

Magnet design and construction: Yang Wenhui and Wang Zheng (Chinese Academy of Science - Beijing)

Projection reconstruction GUI: Erica Mason, Jason Stockmann, and ByungKun Lee (MGH and MIT)

HASTE spin echo train sequence: Jason Stockmann and Bo Zhu (MGH)

Slice-select GUI (work-in-progress): Melissa Haskell (MGH)

References

Consult the User's Guide for information on using the wiki software.

Getting started