From Tabletop MRI
Revision as of 18:40, 13 August 2013 by Cooley (talk | contribs)
Jump to navigation Jump to search

Console Part 1

The console interfaces with the computer via MATLAB. It produces the RF transmit pulses and gradient waveforms based on vectors created in a MATLAB sequence. It also acquires the received MRI signal at a time specified in the sequence. The console samples the received signal and downconverts it to baseband. Some specifics are at: http://mrsrl.stanford.edu/~medusa/hardware/

figure 1. so and so

Console Part 2

Console Part 3