https://tabletop.martinos.org/index.php?action=history&feed=atom&title=Hardware%3AGradient_coil 2026-10-16T01:47:02Z Revision history for this page on the wiki MediaWiki 1.39.8 https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=769&oldid=prev 2020-09-18T07:07:27Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 03:07, 18 September 2020</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1">Line 1:</td> <td colspan="2" class="diff-lineno">Line 1:</td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The gradient coils generate the linear gradient fields that are used for imaging.  They produce a magnetic field in the z direction which changes linearly with position <del style="font-weight: bold; text-decoration: none;">with a slope of 14G/cm when driven with 1 amp of current</del>.  The sensitivity of the gradient coils is 13.7 mT/m/A, 10.4 mT/m/A, and 12.3 mT/m/A for X, Y, and Z, respectively.  The gradient coils for this system are contained on a printed circuit board that is inserted into the magnet bore leaving a space just over 1cm for the sample and RF detector/exciter coil.  </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The gradient coils generate the linear gradient fields that are used for imaging.  They produce a magnetic field in the z direction which changes linearly with position.  The sensitivity of the gradient coils is 13.7 mT/m/A, 10.4 mT/m/A, and 12.3 mT/m/A for X, Y, and Z, respectively.  The gradient coils for this system are contained on a printed circuit board that is inserted into the magnet bore leaving a space just over 1cm for the sample and RF detector/exciter coil.  </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=766&oldid=prev 2020-09-18T07:07:00Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 03:07, 18 September 2020</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l6">Line 6:</td> <td colspan="2" class="diff-lineno">Line 6:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|secondary shield board]] as well as a [[:File:GRADIENT_WIRING_DIAGRAM.pdf|wiring diagram]].</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|secondary shield board]] as well as a [[:File:GRADIENT_WIRING_DIAGRAM.pdf|wiring diagram]].</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The inductance and resistance of the final <del style="font-weight: bold; text-decoration: none;">x</del>, <del style="font-weight: bold; text-decoration: none;">y</del>, and <del style="font-weight: bold; text-decoration: none;">z </del>coils are:   </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The inductance and resistance of the final <ins style="font-weight: bold; text-decoration: none;">X</ins>, <ins style="font-weight: bold; text-decoration: none;">Y</ins>, and <ins style="font-weight: bold; text-decoration: none;">Z </ins>coils are:   </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>X: 10.3 uH, 0.385 ohms</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>X: 10.3 uH, 0.385 ohms</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=763&oldid=prev 2020-09-18T07:02:15Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 03:02, 18 September 2020</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1">Line 1:</td> <td colspan="2" class="diff-lineno">Line 1:</td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The gradient coils generate the linear gradient fields that are used for imaging.  They produce a magnetic field in the z direction which changes linearly with position with a slope of 14G/cm when driven with 1 amp of current.  <del style="font-weight: bold; text-decoration: none;">With 2 </del>A, <del style="font-weight: bold; text-decoration: none;">the slope is 28G</del>/<del style="font-weight: bold; text-decoration: none;">cm so we refer to the sensitivity of the gradients as 14G</del>/<del style="font-weight: bold; text-decoration: none;">(cm </del>A<del style="font-weight: bold; text-decoration: none;">)</del>.  The gradient coils for this system are contained on a printed circuit board that is inserted into the magnet bore leaving a space just over 1cm for the sample and RF detector/exciter coil.  </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The gradient coils generate the linear gradient fields that are used for imaging.  They produce a magnetic field in the z direction which changes linearly with position with a slope of 14G/cm when driven with 1 amp of current.  <ins style="font-weight: bold; text-decoration: none;">The sensitivity of the gradient coils is 13.7 mT/m/A, 10.4 mT/m/</ins>A, <ins style="font-weight: bold; text-decoration: none;">and 12.3 mT</ins>/<ins style="font-weight: bold; text-decoration: none;">m</ins>/A <ins style="font-weight: bold; text-decoration: none;">for X, Y, and Z, respectively</ins>.  The gradient coils for this system are contained on a printed circuit board that is inserted into the magnet bore leaving a space just over 1cm for the sample and RF detector/exciter coil.  </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5">Line 5:</td> <td colspan="2" class="diff-lineno">Line 6:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|secondary shield board]] as well as a [[:File:GRADIENT_WIRING_DIAGRAM.pdf|wiring diagram]].</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|secondary shield board]] as well as a [[:File:GRADIENT_WIRING_DIAGRAM.pdf|wiring diagram]].</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  <del style="font-weight: bold; text-decoration: none;">41uH</del>, <del style="font-weight: bold; text-decoration: none;">41uH</del>, <del style="font-weight: bold; text-decoration: none;">39uH</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The inductance <ins style="font-weight: bold; text-decoration: none;">and resistance </ins>of the final x, y, and z coils are:   </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">X: 10.3 uH, 0.385 ohms</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Y: 10.4 uH</ins>, <ins style="font-weight: bold; text-decoration: none;">0.365 ohms</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Z: 6.4 uH</ins>, <ins style="font-weight: bold; text-decoration: none;">0</ins>.<ins style="font-weight: bold; text-decoration: none;">118 ohms</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=578&oldid=prev 2016-01-25T17:26:12Z

<p>link to wiring diagram added</p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 13:26, 25 January 2016</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3">Line 3:</td> <td colspan="2" class="diff-lineno">Line 3:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [[:File:CAS_Primary_8layers_v3.zip|primary board]] and  </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [[:File:CAS_Primary_8layers_v3.zip|primary board]] and  </div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|secondary shield board]].</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|secondary shield board<ins style="font-weight: bold; text-decoration: none;">]] as well as a [[:File:GRADIENT_WIRING_DIAGRAM.pdf|wiring diagram</ins>]].</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Lapierre https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=554&oldid=prev 2015-09-25T19:41:06Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:41, 25 September 2015</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the <del style="font-weight: bold; text-decoration: none;">primary:</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [[:File:CAS_Primary_8layers_v3.zip<ins style="font-weight: bold; text-decoration: none;">|primary board</ins>]] and  </div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Primary_8layers_v3.zip]] and <del style="font-weight: bold; text-decoration: none;">secondary:</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|<ins style="font-weight: bold; text-decoration: none;">secondary </ins>shield <ins style="font-weight: bold; text-decoration: none;">board</ins>]].</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[:File:CAS_Shielding_8layers_v3.zip|shield]] <del style="font-weight: bold; text-decoration: none;">boards</del>.</div></td><td colspan="2" class="diff-side-added"></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=553&oldid=prev 2015-09-25T19:40:25Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:40, 25 September 2015</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3">Line 3:</td> <td colspan="2" class="diff-lineno">Line 3:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the primary:</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the primary:</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[File:CAS_Primary_8layers_v3.zip]] and secondary:</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[<ins style="font-weight: bold; text-decoration: none;">:</ins>File:CAS_Primary_8layers_v3.zip]] and secondary:</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[<ins style="font-weight: bold; text-decoration: none;">:</ins>File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=552&oldid=prev 2015-09-25T19:39:01Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:39, 25 September 2015</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [[File:CAS_Primary_8layers_v3.zip<del style="font-weight: bold; text-decoration: none;">|primary coil</del>]] and [[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the <ins style="font-weight: bold; text-decoration: none;">primary:</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File:CAS_Primary_8layers_v3.zip]] and <ins style="font-weight: bold; text-decoration: none;">secondary:</ins></div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=551&oldid=prev 2015-09-25T19:38:38Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:38, 25 September 2015</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [File:CAS_Primary_8layers_v3.zip|primary] and [[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the <ins style="font-weight: bold; text-decoration: none;">[</ins>[File:CAS_Primary_8layers_v3.zip|primary <ins style="font-weight: bold; text-decoration: none;">coil]</ins>] and [[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=550&oldid=prev 2015-09-25T19:38:23Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:38, 25 September 2015</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The gradient coil isocurrent contours were calculated by Maxim Zaitsev and Feng Jia of Univ. Freiburg.  The contours were converted to circuitboard traces by Cris LaPierre at MGH. The gradients are implemented as a shielded planar coils, so an inner set of primary coils spaced by about 1cm and the shield coils placed at the magnet poles. The coils are implemented as 8 layer boards with buried vias.  Two layers are dedicated to each of the windings (ie. two layers for the x primary on the primary board).  The copper was 2oz/ft^2 to allow higher currents.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the <del style="font-weight: bold; text-decoration: none;">[</del>[File:CAS_Primary_8layers_v3.zip|primary<del style="font-weight: bold; text-decoration: none;">]</del>] and [[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [File:CAS_Primary_8layers_v3.zip|primary] and [[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  41uH, 41uH, 39uH.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Jaystock https://tabletop.martinos.org/index.php?title=Hardware:Gradient_coil&diff=549&oldid=prev 2015-09-25T19:38:02Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:38, 25 September 2015</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4">Line 4:</td> <td colspan="2" class="diff-lineno">Line 4:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [[File:CAS_Primary_8layers_v3.zip|primary]] and [[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Download Gerber files for the [[File:CAS_Primary_8layers_v3.zip|primary]] and [[File:CAS_Shielding_8layers_v3.zip|shield]] boards.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, <del style="font-weight: bold; text-decoration: none;">z </del>and z<del style="font-weight: bold; text-decoration: none;">^2 </del>coils are:  <del style="font-weight: bold; text-decoration: none;">XX, YY</del>, <del style="font-weight: bold; text-decoration: none;">ZZ</del>, <del style="font-weight: bold; text-decoration: none;">Z2</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The inductance of the final x, y, and z coils are:  <ins style="font-weight: bold; text-decoration: none;">41uH</ins>, <ins style="font-weight: bold; text-decoration: none;">41uH</ins>, <ins style="font-weight: bold; text-decoration: none;">39uH.</ins></div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Gradient_boards_smaller_jpg.jpg|600px|thumb|right|]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:gradientcoil.png|600px|thumb|right|]]</div></td></tr> </table>

Jaystock